Glue Aid Lash Adhesive Accelerator

Glue Aid Lash Adhesive Accelerator and Glue Stopper

Fed up of creating beautiful handmade fans only for them to close when dipped in the glue? 

Fans are falling off natural lashes 10-20 minutes after you have applied them? Or even worse, a lovely client has followed all the aftercare yet comes back with closed fans. There is nothing more frustrating!

This is where Glue Aid Lash Adhesive Accelerator and Glue Stopper is here to help!

Glue Aid is a 2-in-1 product that will not only act as an accelerator to speed up the cure, but will prevent wicking (glue travelling) and your beautiful fans closing.

So if your extensions are flopping off the natural lash, your beautiful handmade fans closing, or adhesive is travelling upwards then this product is what you are looking for!

This product is to be used on the strip of the lash before application and can be used with all brands of adhesive (unless stated otherwise).

Glue Aid also helps to reduce irritation throughout a set and creates a stronger bond. It is oil proof, water proof and sweat proof.

Use together with our Perfect Prep Primer and Megabonder for a true retention trio!

How to use:

Use a microfibre brush to evenly distribute a small amount of product sparingly on the base of the extensions on the strip to accelerate the glue and magnetise the extension to the natural lash. (You can swipe the product using the brush end, only if using brand new/clean products/lash strip for every client, however microfibre is best practice)

Use a hand held fan to quickly dry the lashes, brush through and start your application.

Re-apply every 15-20 mins or when you feel that the adhesive cure has slowed down or it starts to wick up the fan.

Please Note:

If your extensions are flopping or fans closing, then it is usually a sign that your temp or humidity are too low, or that the adhesive is too slow curing for you.

Always attempt to control your levels to perfection, rather than rely on the use of accelerators to assist you.

Use of this product can cause shock curing, if your temperature/ humidity levels are already high, therefore do not use in very high temp or humidity.

Ingredients - 10ML

Aqua, L-Arginine, Propylene glycol, Leucine, Citric Acid, Retinyl Palmitate, Sodium Chloride.

Material Data Safety Sheet

*We recommend to patch test all our products before use.